Pool plumbing moves water from the pool to the equipment and back again. Skimmers collect surface water, suction outlets draw water from other locations, the pump creates flow, the filter removes suspended debris, and return fittings send water back into the pool. Pipe sizes, equipment capacity, and operating settings have to work together.

For a Lake Norman homeowner planning a concrete pool, these details deserve attention before construction starts. Much of the plumbing will eventually sit behind the shotcrete shell, beneath the deck, or underground. Understanding the system helps you ask better questions while those decisions are still easy to discuss.

H2O-Matic Pool and Patio designs and builds custom concrete swimming pools. This guide explains the main components and the information worth requesting from your builder. It is a homeowner overview, not a plumbing installation or suction-system design guide.

1. Follow the water through the circulation loop

In a typical circulation system, water travels from the pool through suction piping to the pump, then through filtration and any connected treatment or heating equipment before returning to the pool. The arrangement varies with the installed products and whether the pool includes a spa, water features, or separate cleaning circuits.

“Suction side” describes the plumbing leading to the pump. “Return side” describes the route carrying water back after the pump. These are useful labels when you review a plan or walk through the equipment pad with your builder. Ask for a simple, labeled diagram of your own system so you can identify each circuit without guessing.

2. Skimmers collect debris at the surface

The skimmer is the opening near the waterline where floating leaves and other debris enter a collection basket. Its job depends on water reaching it. Pool shape, return flow, equipment settings, and the condition of the basket all influence how well the surface is cleared.

For a backyard with overhanging trees, ask how seasonal debris will be managed. Pentair’s variable-speed pump guidance explains that surface skimming can require a different flow setting from lower-speed circulation, and that seasonal debris can quickly fill baskets.

At handoff, have the builder show you the intended operating water level, the basket-care procedure, and the normal pump schedule. A useful maintenance explanation should fit the equipment actually installed at your home.

3. Returns help distribute circulating water

Return fittings are the outlets where water re-enters the pool. Their placement and direction influence circulation. Some fittings allow directional adjustment; for example, Jandy’s TC3 return offers selectable nozzle sizes and directional rotation. That is one product example, not a specification for every pool.

Ask your builder how the proposed layout serves steps, benches, tanning ledges, and changes in pool shape. A plan should explain those areas rather than merely list a number of return fittings. During startup, ask to see the intended circulation pattern and how any adjustable fittings should be left.

A strong jet at one wall does not by itself demonstrate that the complete pool is circulating as intended. The useful question is how the installed system performs throughout the pool in its normal operating modes.

4. Main drains are suction outlets with important safety requirements

The fittings commonly called main drains are part of the circulation system in many pools. Their name can be misleading: normal circulation moves water through the equipment and back to the pool, rather than emptying the pool like a bathtub.

Keep swimmers away from drains and other suction outlets. Never enter a pool or spa with a loose, broken, or missing drain cover. The U.S. Consumer Product Safety Commission’s Pool Safely guidance warns that suction openings can entrap hair, clothing, jewelry, or body parts.

Have a qualified pool professional verify the complete suction arrangement, the installed covers, and the applicable requirements. Ask for the cover model information, inspection guidance, and replacement schedule. Do not remove covers, improvise replacements, block outlets, or experiment with suction valves. A visible cover alone is not a reason to assume the whole system is safe.

If a cover is damaged or missing, keep the pool closed to swimmers and arrange professional service. Include the location and use of emergency shutoff controls in your homeowner training.

5. The pump must match the system

A pump’s horsepower label does not tell you the flow it will deliver through your finished pool. Flow is commonly described in gallons per minute. The pump must work against resistance from the piping and equipment; designers evaluate the pump’s performance curve against the system’s requirements.

Variable-speed equipment allows different operating settings, but the schedule still needs to suit the installed pool. A quiet daily circulation mode may have different needs from heating, spa use, or a water feature. Pentair’s IntelliFlo3 user guide, for example, describes speed and flow programs and configurable limits. Other models have different controls.

When comparing proposals, request the pump model and an explanation of the intended operating modes. Ask how the selected pump, filter, heater, and treatment equipment are kept within their required flow ranges. Avoid choosing equipment from horsepower alone or copying another homeowner’s pump settings.

6. Pipe sizes come from the hydraulic design

Pipe diameter affects water velocity and friction loss. At the same flow, a smaller internal diameter means faster-moving water and generally more friction. Pipe length, fittings, valves, and equipment also contribute resistance. Pentair’s Sta-Rite hydraulics training manual explains these relationships and the role of pump curves.

There is no single pipe diameter that proves a pool is properly designed. A statement such as “we use two-inch pipe” leaves important questions unanswered: which lines, carrying what flow, over what distance, through which components?

Ask for the proposed sizes by circuit and the reasoning behind them. The builder should account for your actual equipment-pad location, pool layout, planned features, and product requirements. A pool with a raised spa and several water features may need a different arrangement from a pool intended mainly for swimming.

Use this discussion to understand the proposal. Final sizing and suction protection belong to the qualified designer and installer working with the applicable requirements.

7. Plan the plumbing before it is covered

In concrete pool construction, plumbing, reinforcing steel, shell penetrations, and equipment routes need coordination before the relevant work is concealed. Shotcrete is the method used to place the concrete shell. Our Lake Norman concrete pool construction guide explains where plumbing fits into the full sequence.

Before construction, ask who documents the installation, which tests and inspections apply, and when they occur. Request records of completed testing and photographs of pipe routes before backfill or decking makes them inaccessible. Keep those records with the equipment manuals.

For a Lake Norman property, review our Lake Norman pool-building guidance and discuss the route between the pool and equipment pad early. Sloping ground, existing patios, landscape plans, access, and the rest of the outdoor living project should all be part of that conversation. A proposed pad location needs both an installation plan and practical access for future service.

Questions to ask before approving the plumbing plan

  • Can you show me the circulation route and identify the pool, spa, and feature circuits?
  • How were the skimmer and return locations chosen for this pool shape?
  • What pipe sizes are proposed for each circuit, and what design assumptions support them?
  • How will the pump and connected equipment operate together in each mode?
  • Who verifies the suction system and documents the installed drain covers?
  • Which tests and inspections occur before the plumbing is covered?
  • What labeled diagrams, photos, manuals, and operating instructions will I receive?

Frequently asked questions about pool plumbing

Are skimmers and returns the same thing?

No. Skimmers draw surface water toward the equipment; returns deliver circulating water back to the pool. Both should be explained on your system diagram.

Does a higher-horsepower pump automatically improve circulation?

No. The pump has to match the complete hydraulic system and the equipment’s operating requirements. Ask about planned flow and operating modes rather than relying on the horsepower label.

Should every pipe in a pool be the same size?

Not necessarily. Different circuits can carry different flows and serve different equipment. Request a circuit-specific explanation from the designer.

Can I copy another pool’s valve positions or pump schedule?

No. Your settings should come from the instructions for your installation. If labels are missing or you are unsure what a valve controls, ask your builder or service professional before changing it.

What should I do about a broken drain cover?

Keep everyone out of the pool or spa and contact a qualified pool professional. Do not attempt an improvised repair or resume swimming until the hazard has been addressed.

Plan a pool that works as a complete system

The plumbing conversation connects what you want to enjoy in the backyard with the equipment and construction needed to support it. Bring your questions about swimming, spa use, water features, maintenance, and equipment access into the design discussion.

Explore H2O-Matic Pool and Patio’s custom concrete pool design and construction services to start planning a pool around your property and the way you want to use it.

Technical references reviewed October 8, 2026. This article provides general homeowner education. The approved design, applicable local requirements, and instructions for the installed products determine the details for an individual pool.

Logo with a blue wave graphic on the left and the text “H2O-MATIC POOL & PATIO” in gray and blue on a white background.